Mountain bike
*Vultures Knob>>>Scooter Battery

Electrical problem with blink-signal?


It is a Honda Spree 1986 scooter.

The horn is working.
The front light work.
The brake light work.

I have put a new fuse,
I have put a new battery,

and still, the blinker, and front-rear signals dont work. Anybody may help ?

have you personally followed the wires to see of the connections are good or if the switch for the turn signals is bad?

I'm unfamiliar with that specific model but it sounds like a ploblem with the relay.

If it's not the relay maybe the wiring has problems. It's fairly old so corrosion might have made the circuit incomplete or the insulation may have perished.

Take a multimeter and set it for 20 ohms and check your blinker relay to see if it has current.First I would clean all your grounds and check the connections on all the lights.If one bulb is out it will cause problems like this.You probably just need a new turn signal relay.Sometimes just by tapping on them you can get them to work.Moisture gets in the housing and corrodes the contacts.

Sounds obvious, but check the bulbs. Flasher units are sensetive to load and if an element in one of the bulbs pops that is enoungh to cause the flasher to malfunction.

Tags
Electric Bike Scooter Store Scooter Repair Scooter Insurance Scooter Wheels Scooter Battery Scooter Parts Razor Scooter Petrol Scooter Motorized Scooter
Related information
 

Bike Categories--Copyright/IP Policy--Contact Webmaster