How do you program schwinn sc8 bike computer?
If it is the old one with a single button on the top then here it goes:
There is a tiny reset button on the back, press and hold until display starts flashing (probably need a paperclip as it is recessed and small, the display will start cycling thru all the numbers & functions). When this happens tap the button on the top of the computer. What should now be flashing is the speed unit (kph). Press the button on top of the computer to get the desired unit, then press and hold down the button so it moves to the tire circumfirence setting. Tap the button on top to change the digit, press and hold to move to the next number. Once the tire size is set (should be four digits if I remember right), tap the reset button on the back. This should now finish programming the computer. To set the time, use the button on top to move to the clock, then tap the button on the back. The first number of the time should be flashing. Tap the top button to set it, press and hold to move to the next number. Once the time is set, tap the reset button to finish. If you do not know the 4 digit number to input for your tire size, go here, and look for the number corresponding to your tire size. The number listed should be pretty close to what you need. The computer you want is the astrale 8 as it uses a 4 digit code. http://www.cateye.com/en/tech_support/ma... |
