|
|
| *Vultures Knob>>>Road Bike |
PLEASE HELP!!! its kind of urgent!? |
Hi all ok this might sound like a really weird question but i need to know within the next half hour!!! ok here goes! how much would it cost to place about a dozen road- type signs along a bike track?? the side of the track is turf the signs are like road sign (eg. stop, no right turn etc.0 same material whatever! you get what i mean! so , i need about 12 installed how much would each cost and how much would installation cost? thanks!!! also if you are very kind..... how much would it cost to install a smallish security camera?? (outdoors) thanks so much!!! God bless you all!!!! Probably about $30/ sign for vinyl covered steel, (after I had a custom sign made, I can tell you this definitively.) Any print shop should be able to help you. If you want reflectives, I don't know if that would be a problem or would raise the cost. If these are temporaries, I'd look at mounting them on sawhorses to avoid digging a bunch of needless holes. If they're to be permanent, then you're going to have to add the cost of 1 1/2" galvanized pipe to mount them on and the beer it takes to have friends dig holes and erect the signs. Dig a hole about 1' dia. down about 2', stick the signpost in the hole, pour an entire bag of cement mix around it, then pour in a gallon of water and fill the remainder of the hole, your sign is up. Depending on the soil you're digging in and it's density, plan on anything from a few cases to a keg. And your outdoor camera is going to depend on the location and how much you're planning on spending on it. You can buy remote cameras, which will feed wirelessly to your computer, or cheap cameras that you'll have to hard-wire into the computer. In the case of the former, wait until someone installing a fence post, pref. someone fairly athletic, is half loaded and have them climb a tree with a camera and a screw gun. Make sure they're only half loaded because you're going to want it to point in the correct direction. For hard-wired and more complex systems, I typically use a sub-contractor, (Brandt,) which will be much more expensive than a half drunk college student with tree climbing ability. Source(s): I build complex buildings, structures and systems. well i cant really tell you the right price but i would guess around $500-$800 to get it all done. sorry i couldnt really help but thats all i can tell you total cost for signs labour and materials, i would set aside about 1000-1200 pounds, as road signs needs to be reflective and set in solid foundations- exact prices are very hard as different people charge different amounts, advice is to shop around and haggle on labour |
| Tags |
| Recumbent Bike Bmx Bike Kids Bike Schwinn Bike Cruiser Bike Road Bike Folding Bike Mountain Bike |
Bike Categories--Copyright/IP Policy--Contact Webmaster |