|
|
| *Vultures Knob>>>Mountain Bike |
My gear cable broke on my mountain bike. Can I make it a single speed? |
I don't want to get involved with all the fixing so I want a quick at home fix that will work Yes . The easy thing to do would be replace the cable and readjust the derailleur. This link takes you through step by step. http://sheldonbrown.com/derailer-adjustm... Otherwise you can adjust the higher / lower screws (on the derailleur so that it sits on only one cog. A spoke or piece of fencing wire bent over can be clamped where the cable end goes to hold it in one gear.( I've done this to get home once.) If it is the front derailleur you can just place a wedge between it and the frame. I'd go with the new cable though (unless your miles from home.) Take it to your local bike shop. the cable itself will cost around 2 dollars and a few more for them to replace it. It most likely would not pedal correctly without the cable. If it did, it would be on the smallest cof and would be difficult to pedal. |
| Tags |
| Kids Bike Schwinn Bike Cruiser Bike Road Bike Folding Bike Mountain Bike |
Bike Categories--Copyright/IP Policy--Contact Webmaster |