I was also looking for aftermarket parts.
probably cant fit plastics from the 2007 model on it, but you may be able to find newer plastics that are not an exact fit but will go on with a bit of a tug. what you can do, is buy a new decal kit and trim the decals to fit the old plastics, if the old plastics are still around.. this can be solved be dealership really easily if you call them and give them the serial number on the frame and maybe the engine as they will have a list of all the fitting plastic parts. good luck hunting them down. go to www.chaparral-racing.com for aftermarket parts. they have almost anything.
Source(s):
mechanical engineer and have been riding dirt for years
i believe that you can fit the front number plate and front fender with no modifications.If you were to change the anything else would reguire you too make you own brackets.Can iot be done yes but it has to be done as a whole.The gas tank and shroud would require a new gas tank bracket.That would then lead you to the seat.The seat would also require new brackets on the subframe,and then there is the rear fender,If it will fit around the subframe brackets can be made,then there is the exhaust silencer that is going to burn a hole is the new side panels.My best advice IF YOUR 89 NEEDS NEW PLASTIC BY REPLACEMENT FENDERS FROM A COMPAMY LIKE MAIER.
Acerbis, UFO, and Maier all have universal plastic for all makes of bikes or ATV's. Your side number-plates are going to be the hardest things to find or get and will most likely have to be model specific or OEM.
|
