IS Hoffman Condor EC1 A GOOD BMX BIKE TO BUY?

you need to buy a crank puller...you can usually buy these from a local bike store or they could get one in for you...i think that you should buy one...i have one and they are usefull to have aroun...

GT isn't what it used to be. And if you buy it from a department store, it will be constantly breaking down on you. GT is nothing more than an overpriced Next junk bike. Save a little more and...

theres not a lot of good BMX's you can get for $160 the best mongoose i have found is a Mongoose Menace on this website ...

The bike has a threadless steerer stem. The handlebars cannot be raised. The 4 bolts hold the stem to the fork steerer and the big nut at the top just provides preload so the bearing play can be...

oooo you trying to get a bike man? Well i live in the BX so i only know one place in Dyckman st. The Fit bikes there are hot.

You have a loose headset. Your stem should have two bolts on the side and one on the top. Loosen the two side bolts. Tighten the top bolt until the play is gone. Make sure that your bar is aligned ...

Keep in mind that cromoly (chrome molybdneum) is steel, and like anything, there is cheap cromoly and good cromoly. The bike you are looking at is the cheap stuff. Also, remember that hi tensile st...

if you have a 1 piece i think you can still change the sprocket but getting a bolt thing loose on the inside of the crank will be the hardest part, if you take off the pedal then undo all the bits ...