|
|
| *Vultures Knob>>>Bike Lights |
Problem with an oil change on a Buell Blast 2001...? |
I've never changed the oil on anything before so if there's something you're not thinking of because it would be too obvious, please still mention it. I drained the oil (I was showed how by a mechanic at HD briefly), changed the oil filter, and added oil. However, I added a bit too much oil and decided to deal with this problem the next morning. When I woke up, a forgot to drain the extra oil so I did that, however, I first attempted to start the bike (because I forgot) and it wouldn't start. I couldn't drain all the extra oil either, I'm guessing since the oil isn't warm, it's not coming out that quickly. Anyway, my bike won't start anymore. I ONLY touched things to do with the oil. When I turn the bike to ON, the lights come on, but when I try to start it, the lights dim a bit and it whines and won't start. Usually the oil light comes on when it's not started, but now after attempting to start it, it permanently turns off until I turn the bike off and on again. Any thoughts? open both drain plug and fill plug to let air in then put right amount in . pull spark plugs out and clean they could be oil soaked. make sure you turn the gas on. you could put a teaspoon of gas in each cylinder. before putting spark plugs back in good luck |
| Tags |
| Bike Tours Trail Map Bike Pedals Bike Lock Bike Lights Bike Helmet Quad Bike Pocket Bike Mini Bike |
Bike Categories--Copyright/IP Policy--Contact Webmaster |