Mountain bike
*Vultures Knob>>>Bike Lights

Dents on a motorcycles gas tank?



I have a few very small dents on my motorcycles gas tank. Sense the paint im painting it with will reflect light, and this bikes value will be based on its condition, i want the dents to simply, go away.

heres the picture

http://img299.imageshack.us/img299/4379/...

You may not see all the dents cause of the angle but they are there.

I dont have the materials or skill to cut and weld the tank, and i dont know if that thing u can buy can undent this thing with suction becuase this is pretty thick metal.

Last question, if i have this professionally painted, how much will that cost (just the tank) and if they do it, can they undent it. If not how much will it cost to get it undented?

~~~~~~ NO BONDO! NO NEVER! ~~~~~~~~
If you are wanting to keep the value of the bike at max then take it to a shop that specializes in motorcycles! Most of the time it can be repaired and repainted. If it cannot be repaired, bite the bullet and buy a replacement tank. Nobody wants a bike with bondo repairs.... NOBODY!
Looking at the pic I think this would be and easy repair.
Expect to pay Minimum $100 for dent removal. Paint job can run the gamut from $100 (if you buy the paint in spray cans from a automotive paint shop) up to $5,000 for a bada$$ custom paint job.
Good Luck and Safe Riding!
My brother had great success leaving the dents and using 'Bondo' to fill and then sanded, primed and painted.
Hi again, I'll agree with Cellophan, a good bodyman could fill those dents easily, you never know that they are there. I have an old Kawasaki that was vandalized with a hammer, the bondo on top of the tank is 3/4 inch thick, you'ld never know unless I told you.
GB
You have Two options, either grind out the dents all the way to the metal and fill them with bondo and feather them out or fill them with lead. But with lead you have to be VERY CAREFUL whe using flame around a fuel tank. Better to let a proffesional do this repair. As far as the paint job goes, it all depends on WHAT KIND of paint job you want, and the person doing the work. Any good body shop can paint a tank but that is not usually their specialty. I would ask friends and the like if they know anybody who does decent body and paint work. They are all over if you just search and look at their work and go from there.
Tags
Bike Tours Trail Map Bike Pedals Bike Lock Bike Lights Bike Helmet Quad Bike Pocket Bike Mini Bike
Related information
  • Dr Spock - do the Xians understand the Teletubbies ?
  • Is 30 minutes of biking enough to make a difference?
  • I have a 1994 Mustang GT. As my car runs there is a very low whistle and hiss. Whats wrong?
  • What is a good first motorcycle for a person who is 5'2" and 100lbs?
  • I want to become a Nomad warlord and conqure?
  • How much is a 93 Honda CBR 600 that is not running but is in otherwise decent shape, worth?
  • My bikes rpm automatically raises to 2000 rpm while standstill. It raises comes down again raises.?
  • Xj600n problem again. EVERY WEEK THIS BIKES FAILS ME?
  •  

    Bike Categories--Copyright/IP Policy--Contact Webmaster