|
|
| *Vultures Knob>>>Bicycle Shop |
I have an old school GT PERFORMER and i've ruied the back axel ...? |
how much is a reasonable charge for a bike shop to replace the axel for me? i know the axel is prolly around 20 bux, but what do you think? btw: i cant do this myself, i have no tools, some prick stole them. The AXLE is generally pretty cheap- maybe $5 or so, BUT the labor will probably be closer to $20. Depending on how long you rode the bike with a bent axle may mean you might need new bearings and cones which will increase the cost of parts a little, but the labor should be about the same. just check around a local dump they have bikes left there or thrown away all the time, it will cost you nothing but time searching You might be able to get the rear hub rebuilt. Check with a bike shop to see if that is possible with the one you have. Prices will vary because of the parts needed. If you need to replace the hub, they start at about $80, and labor shouldn't be any more than $20. |
| Tags |
| Cycling Bike Race Bike Insurance Bike Repair Bicycle Shop Bike Tours Trail Map Bike Pedals Bike Lock |
| Related information |
You need to check with dmv on where to get the title first. ...I didn't answer this question last night because I'm not quite sure whether you're looking for hiking trails or bike trails or mountain biking trails, or some combination of the abo... Hey Mic, I use Synthetic Motorcycle fork oil in all of my forks. I would recommend either 2.5 or 5 weight fork oil. I use Golden Spectro, but there are all types of great Synthetic fork oils o... Bicycle serviceman? Bicycle repairman? Bicycle mechanical technician? Bicycle retailer? ...all the classic signs of crap in the float bowls.......just drain the carbs via the float bowl drain screws and it should be fine. The bike will idle because the bike is running on the idle jets... Yes. As the capital is full of foreigners, they do cycling a lot as compared to other states. It could be a safe bet. ...The problem is that the pipes are missing!! If you had the pipes then it MIGHT be clear how to fit them but without that, there are to many unknowns! Not the least of which is where do they go! ...I believe you have to be 14 to work at most jobs (non-farming) in the USA. I was a paperboy when I was 13 and made good pocket change, but it seems like paperboys are more and more rare now, as pa... |
Bike Categories--Copyright/IP Policy--Contact Webmaster |